_(1)_(1)_(1).png){kind=logo}
Wheel hub ø 180 mm
Compatible models: GL25, GL26, GL260, GL261, GL268, GL27, GL277, GL280, GL281, GL29, GL300, GL301, GL32, GL320, GL321, GL33, GL337, GL338, GL35, GL350, GL367, GL368, KL21, KL210, KL215, KL225, KL23, KL230, KL235, KL24, KL245, KL25, KL250, KL255, KL265, KL27, KL270, KL28, KL30, KL300, KL31, KL310, KL315, KL3150, KL33, KL330, KL34, KL340, KL345, KL360, KL38, KL380
Product detailed description
Wheel hub ø 180 mm
What the part is for: The wheel hub transmits torque from the front-wheel drive to the wheel. Worn teeth show up as noise and vibration when front-wheel drive is engaged.
How to check the part fits: The list of compatible models in the short description and in the product parameters is decisive – find your tractor there. If in doubt, send us an enquiry via the Write to us form and we will check compatibility.
What to replace at the same time: We recommend replacing the hub seals and bearings and topping up the oil; when repairing, it is worth replacing the hubs on both sides.
Why buy from us?
Key features
- ▸If the teeth show wear or deformation
- ▸In case of noise, vibration or irregular movement when front-wheel drive is engaged
- ▸When overhauling or repairing the front-wheel drive, we recommend replacement on both sides
Related categories
|
| ||||
|
🔧 Kubota compact tractor service and maintenance
Regular maintenance will extend the life of your compact tractor by years. In our blog article you will find a detailed guide to servicing and maintenance — when to change oils, what to watch out for in winter and how to recognise worn parts.
Read the article on service and maintenance ↗What you get with us
In stock, ready to ship We ship most orders within 1 working day. | Reliable quality Quality parts and proven alternatives. |
Tailored service Compact tractor refurbishment, fitting, technical support. |
Additional parameters
| Category: | Compact Tractor Axles |
|---|---|
| Warranty: | 2 years |
| Plate diameter: | 180 mm |
| Hub height: | 110 mm |
| Shaft length: | 88 mm |
| Diameter of milled teeth: | 36.50 mm between teeth |
| Working length of the milled section: | 29 mm |
| Number of drive teeth: | 30T |
| Tractor compatibility: | GL25, GL26, GL260, GL261, GL268, GL27, GL277, GL280, GL281, GL29, GL300, GL301, GL32, GL320, GL321, GL33, GL337, GL338, GL35, GL350, GL367, GL368, KL21, KL210, KL215, KL225, KL23, KL230, KL235, KL24, KL245, KL25, KL250, KL255, KL265, KL27, KL270, KL28, KL30, KL300, KL31, KL310, KL315, KL3150, KL33, KL330, KL34, KL340, KL345, KL360, KL38, KL380 |
